JOUCOMATIC導式電磁閥，美國ASCO導式電磁閥
浪涌電流：電源，接線和輸出使用的設備需要有浪涌額定值等于或大于
比于下表中的浪涌電流值（適當的電壓范圍內）。
在下代線圈采用了的技術包括電子電路，這可能會限制兼容性
某些控制系統等組成。以下問題需要考慮當
輸出卡或設備操作下代線圈。初始浪涌電流尖峰是由下個畫
產生線圈。這種浪涌尖峰是72毫秒的持續時間，這是足夠的時間使芯達到plugnut 。
電力需求則下降到控股value.The新代電磁線圈采用杜邦™ ZENITE ®液晶聚合物樹脂（ LCP ）*封裝。
ZENITE （LCP）是種熱塑性聚酯樹脂，它比其他熱塑性塑料具有幾個優點。該
優點包括范圍廣泛的有機溶劑和汽車液體* ，耐優良的耐
Type 2 Dripproof – Intended for indoor use, primarily to provide protection against limited amounts of falling
Type 3 Raintight, Dusttight, and Sleet (Ice) Resistant – Intended for outdoor use, primarily to provide protection
against wind-blown dust, rain, and sleet; undamaged by the formation of ice on the enclosure.
Type 3S Raintight, Dusttight, and Sleet (Ice) Resistant – Intended for outdoor use, primarily to provide
protection against wind-blown dust, rain, and sleet; external mechanism remains operable when ice laden.
Type 3R Rainproof, Sleet (Ice) Resistant – Intended for outdoor use, primarily to provide protection against
falling rain and sleet; undamaged by the formation of ice on the enclosure.
Type 4 Watertight and Dusttight – Intended for indoor or outdoor use to provide protection against splashing
water, water seepage, falling or hose-directed water, and severe external condensation; undamaged by the
formation of ice on the enclosure.
Type 4X Watertight, Dusttight, and Corrosion Resistant – Same as Type 4 but provides additional protection to
Class I, Division 2 for Hazardous Locations/Watertight – Meets Types 1 through 4X and is UL listed and
CSA certified for Class I, Division 2, Groups A, B, C, and D and Class II, Division 2, Groups F and G. Operating
temperature code T4A (120°C).

JOUCOMATIC導式電磁閥，美國ASCO導式電磁閥